Perfecting imperfections – The different types of abrasive blasting

Abrasive blasting is a very efficient method of removing imperfections from a surface. If you are working on raising a building or doing some renovation work, then abrasive blasting can play a key role in how the end product turns out. If you have considered abrasive blasting for your project, you should know that there are multiple types of abrasive blasting. Each technique brings its own perks to the table, and the first step of choosing the right one for you is to know what the differences are. With that said, here are the different methods in which abrasive blasting can be performed.

Bead blasting

This type of blasting is done with the use of glass beads. By using these glass beads, imperfections can be removed from the engaged surface. If there are any types of deposits on the surface, you can use bead blasting in order to get rid of them. It excels when it comes to getting rid of fungus, but also things like paint or even calcium deposits.

Hydro blasting

As the name implies this type of blasting uses water. To be more specific, it uses a high pressure water pump to remove whatever is needed off a surface. It is also simply referred to as water blasting, and it can do a really great job against things like chemicals and debris.

Bristle blasting

There is more than one type of “ammo” for blasting. If you don’t like or want to use blast media, bristle blasting offers the alternative of using a steel brush. This is a high-carbon rotary brush, and it can be used to coarse a surface of any imperfections.

Dry ice blasting

You can also try and dislodge deposits from a surface, using dry ice. This method uses the aforementioned dry ice but also air. One of the best things about this kind of blasting is the fact that it leaves very little behind, due to the dry ice component. So the cleanup duty will be minimal. Worth keeping in mind, if you’re not one for cleaning up.

Automated blasting

This is an automated process, as the name suggests, and it is performed within a chamber. Going the automated route has its benefits and it can definitely be useful in many types of situations. It just further goes to show that there are many ways in which the process of blasting a surface can be fulfilled.

Wet abrasive blasting

If you’re dealing with things like grease, dust or even dangerous chemicals, you can use web abrasive blasting to get rid of them. This form of the process is done using water, which can be either cold or hot. In order to give it a boost, you can also add detergent to the water for the extra effectiveness.

Recent Posts

Do NOT follow this link or you will be banned from the site!