Ways to Clean Glass Windows Without Leaving Streaks

/

Cleaning glass windows without leaving behind those annoying white streaks is a time-consuming and difficult task. But you can’t leave the windows with those dirty streaks. So, what can you do to get rid of them?

Well, look no further because this article lists out the ways to get streak-less windows with a few tools and techniques.

Tools Needed For Spotless Windows 

Shiny windows are no joke, you’ll be needing a few extra things to achieve the desired results. Get the following tools and equipment if you don’t have them.

  1. A lint-free cloth.
  2. A scraper if you have stickers, paint, and other stubborn stains on the windows.
  3. A vacuum cleaner.
  4. A strong cleaning solution.
  5. A sponge and a bucket.
  6. A window squeegees.

Homemade Cleaning Solution

With a few items, you can make the best DIY cleaning solution ever. Apart from being easy to make, it’s also economical and better than commercial cleaners. You’ll need:

  1. Rubbing alcohol
  2. White vinegar
  3. Dish soap (optional)
  4. Water
  5. Spray bottle

In a spray bottle, combine equal parts of alcohol, vinegar and water, then add a few drops of dish soap. Shake until a homogenous mixture is formed. Your simple homemade cleaning solution is ready to use!

Mistakes To Avoid

Can anyone make a mistake while performing such an easy task? Well, yes. There are a few cleaning mistakes which could lead to streaky windows. To avoid them follow the instructions below:

  1. Use distilled water for cleaning windows.
  2. Don’t lift the squeegee in between wiping.
  3. Don’t clean the windows without dusting them off first.
  4. Don’t use an absorbent cloth or paper towels for drying the windows.
  5. Don’t spray the solution directly on the windows, instead spray it on the sponge or the cloth you are using.
  6. Don’t leave the cleaning process mid-way.

Fool-proof Cleaning Process For Streak-less The Windows

Follow the simple instructions to get squeaky clean and streak-less windows.

1.Remove The Stains

Get rid of all the stubborn spots such as old paint stains, bird poop, tape or stickers which have made their home on your windows. Wet the paint, tape and other hard stains, then use a scraper to remove them. For sticky dirt, dab a few drops of vinegar on them and rub it off with a cloth.

2.Vacuum Or Hose It All

If you sponge your windows without vacuuming them, it’ll create streaks as the sponge picks up the dirt and dust. Vacuum all around the windows to prevent this. If you’re planning to buy a window vacuum cleaner, then you should check out the Karcher WV5 Review. For outdoor windows, you can use a hose and spray water all over the windows.

3.Spray It Off

After you’re done with the pre-cleaning, grab your cleaning solution and get to work. You can use a commercial cleaner or a DIY cleaner, both will render the same results. Start spraying from the top and cover the windows with the solution evenly. Wait for a minute, then gently wipe it off with a lint-free cloth or sponge.

4.Sponge It Off

Instead of spraying, you can fill a bucket with the cleaning solution and dip your sponge inside. Squeeze excess solution from the sponge and gently wipe the windows in a uniform motion.

5.Wipe It Dry

Once you’ve wiped off the cleaning solution, use a squeegee to wipe off the excess water. Start from the top of the window in vertical or horizontal strokes. Wipe the squeegee rubber blade with a clean cloth after each stroke and never lift the squeegee in the middle of a swipe, this ensures a streakless cleaning process.

6.Cleanup

After cleaning and drying the window, take a dry cloth to wipe excess water that may have gathered around the window edges and sills. This cleanup process is important to prevent the formation of streaks.

After reading this article, you’ll be able to see through your streakless window.

Recent Posts